nichia product guide utz-sc0008_ 0 -1- violet laser diode NDHV310AFBE2 engineering sample ? features ? optical output power: 30mw ? single transverse mode ? can type: 5.6 floating mounted ? absolute maximum ratings item symbol absolute maximum ratings unit optical output power poc 35 mw ld reverse voltage vr (ld) 5 v storage temperature tstg -35 ~ 85 c operating case temperature tc -10 ~ 60 c ? initial electrical/optical characteristics (tc=25 c, po=30mw/cw) item symbol min typ. max unit optical output power po - 30 - mw peak wavelength* p 400 408 415 nm threshold current ith - 45 60 ma operating current iop - 70 90 ma slope efficiency 0.7 1.2 1.6 w/a operating voltage vop - 4.5 5.5 v // 5 8 13 fwhm beam divergence ? 18 24 30 ? // - - 2.5 angle ? ? - - 3 emission point accuracy position ? x, y, z - - 80 m all figures in this specifi cation are measured by nichia's method and may contain measurement deviations. *: fwhm < 1nm the above specifications are for reference onl y and may be changed without prior notice. nichia corporation http://www.nichia.co.jp head office: p.o.box 6 anan, tokushima-ken 774-8601, japan phone: +81-884-22-2311 fax: +81-884-23-1802 contact tokyo sales department optoel ectronics products div.: 13f ta machi center building, 34-7, shiba 5-chome, minato-ku, tokyo 108-0014, japan phone: +81-3-3456-3108 fax: +81-3-5440-7330 e-mail: laser@tokyo.nichia.co.jp 2 1 3 ld 1. ld anode 2. ld cathode 3. nc
nichia product guide utz-sc0008_ 0 -2- ? typical characteristics ? optical output power vs. forward current 0 10 20 30 020406080 forward current if [ma] optical output power po [mw] 20c 40c 60c ? forward voltege vs. forward current 0 1 2 3 4 5 6 0 20406080 forward current if [ma] forward voltage vf [v] 20c 40c 60c ? far field pattern 0 0.2 0.4 0.6 0.8 1 -60 -40 -20 0 20 40 60 angle [] relative intensity tc=25c po=30mw ? // ? frequency response -5 -4 -3 -2 -1 0 1 2 3 01234 frequency [ghz] relative intensity [db] 30mw 5mw tc=25c ? typical spectrum 406 407 408 409 410 wavelength [nm] relative optical output power tc=25c po=30mw ? peak wavelength vs. case temperature 404 406 408 410 412 414 10 20 30 40 50 60 70 case temp tc [c] peak wavelength [nm] po=30mw
nichia product guide utz-sc0008_ 0 -3- ? outline dimension ( ) are reference figures ? safety of laser light laser light can damage the human eye and the eyes of animals. do not look at any laser light directly or through any optical lens. when handling a laser diode, do not look directly at the light generated by it. wear appropriate safety glasses to prevent light from entering the eye by reflection off of another surface. nichia lds are classified in class 3b of iec60825-1 and 21 cfr part 1040.10 safety standards . it is absolutely necessary to take overall safety measures against user's modules, equipment and systems into which nichia lds are incorporated and/or integrated. ? operating method laser diodes are to change forward voltage and light output power due to the fluctuation in temperature etc. they have some tendency to gradually increase electric current necessary to keep the output power constant during their operation. when precise optical output control is required, it is recommended to use an external photo diode to monitor output power and use apc (automatic power control) function in the operating circuit. ? cautions on ld handling static electricity and surge damage the lds. it is reco mmended to use a wrist strap or anti-electrostatic glove when handling the product. nichia lds described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances). consult nichia?s sales staff in advance for information on the applications in which exceptional quality and reliability are required, particularly when the failure or malfunction of the lds may directly jeopardize life or health (such as for airplanes, aerospace, submersible repeaters, nuclear reactor control systems, automobiles, traffic control equipment, life support systems and safety devices). the specifications of the product may be modified for improvement without prior notice. the formal specifications must be exchanged and signed by bot h parties before a user starts mass production. strictly prohibited are reverse engineering and disassembly concerning, but not limited to, structure and composition of the product. caution-use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1. ld anode 2. ld cathode 3. nc * this model does not have photo diode. 2 1 3 ld connection top view side view bottom view 3 0.450.1 6.51.0 2.30.2 3.55 0.1 0.250.03 glass thickness emitting point reference plane 1.20.1 1.30.08 1 2 3 2.0 0.2 x + y + 5.6 (90 ) (0.4) ( 1.6) 1.0 0.1 4.2 0.2 +0 -0.03 3.55 0.1 0.4 0.1
|
